1. Product Overview

This is a new OEM LCD touch screen display assembly for the Garmin DriveSmart 55 GPS navigator. It includes the outer frame/bezel but does not include adhesive. It is intended for users replacing a cracked, unresponsive, or otherwise damaged display on their DriveSmart 55 unit.

2. Compatibility

Compatible:

• Garmin DriveSmart 55
• Garmin DriveSmart 55 & Traffic (same display hardware; confirm your unit model before ordering)

Not confirmed:

• Garmin DriveSmart 51 (different display resolution and hardware)
• Garmin DriveSmart 65 / DriveSmart 66 (6" display, different size)
• Garmin Drive 53 (5" display, lower resolution, different hardware family)
• Other Drive or DriveSmart series models

Garmin's DriveSmart lineup includes several similarly named models with different screen sizes and resolutions. According to Garmin's official specifications, the DriveSmart 55 uses a 5.5" edge-to-edge display with 1280 x 720 resolution. Confirm the exact model printed on the back of your device before ordering, since screens are not interchangeable across DriveSmart variants.

3. Common Replacement Scenarios

This part is typically needed when the original display shows:

• Cracked or shattered glass
• Unresponsive or partially unresponsive touchscreen
• Dead pixels or display artifacts
• No image / black screen despite the unit powering on
• Discoloration, flickering, or abnormal display output

4. Key Features

• New OEM part — not a used/pulled unit
• Combined LCD panel and capacitive touch digitizer layer
• Includes outer frame/bezel
• Does not include adhesive; adhesive should be sourced separately for reassembly
• Matches original 5.5" edge-to-edge display specification (1280 x 720, multi-touch glass, backlit)

5. Specifications

6. Installation Notes

Replacing this component involves opening the device housing and disconnecting the internal flex cable that links the screen to the mainboard. Because this assembly does not include adhesive, reassembly requires separately sourced adhesive strips to properly seat the frame against the housing. This repair involves flex connectors and precise alignment during reassembly, so professional installation or prior repair experience is recommended to avoid damaging the connector or surrounding components.

7. What Is Included

• 1x Garmin DriveSmart 55 LCD touch screen display assembly (New OEM)
• Frame/bezel: included
• Adhesive: not included

8. Buying Checklist

• Confirm your device is the Garmin DriveSmart 55 (not DriveSmart 51, 65, or 66)
• Note that adhesive is not included — source separately for reassembly
• Compare the connector position and flex cable orientation with your original screen before ordering
• Confirm whether professional installation is required for your comfort level
• Verify the frame dimensions match your original housing before purchase

9. FAQ

Q: Is this a new part or a used/pulled part?
A: This is a new OEM display assembly, not a used or pulled part.

Q: Does this include the frame?
A: Yes, the frame/bezel is included. Adhesive is not included.

Q: Is this compatible with Garmin DriveSmart 65 or 66?
A: Compatibility with DriveSmart 65/66 is not confirmed. Those models use a 6" display. This part is listed specifically for Garmin DriveSmart 55. Please verify your exact model before ordering.

Q: Does installation require professional repair skills?
A: Yes. The repair involves device disassembly, flex cable connection, and applying adhesive separately during reassembly, so professional installation or prior repair experience is recommended.

Q: Will this fix a black screen issue?
A: A black screen can be caused by the display itself or by other internal components. Confirm the display is the actual cause before ordering.

Package Include

• Repair parts are shown in the picture.

Product Inspection

• Display Screen Check
• Cable Connection Check
• Frame Waterproof Test
• Contact Oxidation Inspection