Product Overview

This is a replacement LCD display screen (non-touch) for the Garmin STRIKER 4, STRIKER 4cv, and STRIKER 4dv fishfinder units (original STRIKER series). It is intended to replace an original display that is cracked, has dead pixels, shows abnormal colors, or has stopped producing an image. This is a physical-button (keyed) operated display — it does not include a touchscreen panel.

Available in two versions:

• Screen only — LCD panel without frame/bezel
• Screen with frame — LCD panel with the surrounding frame/bezel included

Brand: Garmin
Product family: STRIKER (original series — not Plus or Vivid)
Compatible models: STRIKER 4, STRIKER 4cv, STRIKER 4dv
Device type: Fishfinder with GPS
Part type: LCD display screen (non-touch), available with or without frame

Compatibility

Compatible:

• Garmin STRIKER 4
• Garmin STRIKER 4cv
• Garmin STRIKER 4dv

Compatibility across all three models has been verified by the seller through direct comparison of the display's flex cable/connector, confirming they use the same configuration.

Not confirmed:

• Garmin STRIKER Plus 4 / STRIKER Vivid 4cv — these are different product generations with a different screen size (4.3" vs 3.5") and resolution (272x480 vs 480x320). Do not assume interchangeability.
• Other STRIKER original-series sizes (5cv, 5dv, 7sv, 7cv, 9sv) — different screen sizes.

Not compatible:

• Any non-STRIKER Garmin device.
• STRIKER Plus or STRIKER Vivid series (confirmed different screen specs).

Common Replacement Scenarios

• Cracked or shattered display glass
• Dead pixels or discolored sections of the screen
• Display shows no image despite the unit powering on
• Faded, dim, or flickering screen
• Physical impact damage from outdoor/marine use

Key Features

• Direct-fit LCD display screen for Garmin STRIKER 4, 4cv, and 4dv
• Cross-compatible across all three models — verified by matching flex cable/connector configuration
• Available as screen-only or screen-with-frame, depending on repair needs
• 3.5" diagonal display, 480 x 320 resolution (HVGA)
• Non-touch, physical button operation

Specifications

Installation Notes

Replacing this component typically involves opening the unit housing and disconnecting/reconnecting the display's flex cable. If ordering the screen-only version, the original frame/bezel will need to be transferred from your damaged unit. Since the original unit is rated IPX7 for water resistance, care should be taken to properly reseal the housing after installation. Professional installation is recommended if you are not experienced with small electronics disassembly.

Buying Checklist

• Confirm your unit is specifically STRIKER 4, 4cv, or 4dv — not STRIKER Plus 4 or STRIKER Vivid 4cv, which use a different screen.
• Decide whether you need the screen-only or screen-with-frame version, based on the condition of your original frame/bezel.
• Compare the flex cable connector of your original damaged screen before ordering, if possible.
• Confirm with the seller whether waterproof sealing needs to be reapplied during installation.

FAQ

Q: Does this screen have touch function?
A: No, this is a non-touch LCD display screen. The STRIKER 4, 4cv, and 4dv are operated by physical buttons.

Q: Is this the same screen used in STRIKER Plus 4 or STRIKER Vivid 4cv?
A: No. The Plus and Vivid series use a larger 4.3" screen with a different resolution. This part is only for the original STRIKER 4, 4cv, and 4dv.

Q: Is this compatible with all three models — 4, 4cv, and 4dv?
A: Yes. The seller has verified compatibility across all three models by comparing the flex cable/connector configuration.

Q: Should I choose the screen-only or screen-with-frame version?
A: If your original frame/bezel is undamaged and can be reused, the screen-only version is sufficient. If the frame is cracked, warped, or damaged, choose the screen-with-frame version.

Q: Does installation require professional repair skills?
A: Professional installation is recommended due to flex cable handling and the need to maintain the unit's water resistance.

Q: What should I check before ordering?
A: Confirm your exact model is STRIKER 4, 4cv, or 4dv — not a Plus or Vivid model, and choose the correct version (with or without frame).

Package Include

• Repair parts are shown in the picture.

Product Inspection

• Display Screen Check
• Cable Connection Check
• Frame Waterproof Test
• Contact Oxidation Inspection