Product Overview

This is an original replacement LCD screen with touch digitizer for the Garmin inReach Explorer+ satellite communicator, in essentially all-new original condition, priced at $120. This part is intended for units with a cracked screen, unresponsive touch input, dead pixels, or no image.

Note on product photos: Screen assemblies in stock may show some variation in appearance between batches (panel texture/tint can look different depending on lighting and batch). Both units shown are supplied and confirmed as inReach Explorer+ parts.

Entity summary:

• Brand: Garmin
• Product family: inReach series
• Exact model: inReach Explorer+
• Part type: LCD screen with touch digitizer
• Condition: Essentially all-new, original
• Screen code (visible on one unit): GPM1566C0
• Device type: Satellite communicator / GPS messenger

Compatibility

Confirmed compatible:

• Garmin inReach Explorer+

Not confirmed — do not assume compatibility:

• Garmin inReach Explorer (original, non-Plus) — this earlier model used a different display and is not confirmed interchangeable.
• Garmin inReach SE / SE+, inReach Mini / Mini 2, or GPSMAP 66i. These use different screen sizes and, in the case of the Mini series, a much smaller monochrome MIP display. Confirm your exact model before ordering.

Common Replacement Scenarios

This part is typically ordered to replace an original display showing:

• Cracked or shattered touch glass
• Damaged or discolored LCD panel
• Dead pixels or blank sections of the screen
• Touchscreen unresponsive to touch input, in part or entirely
• Display flickering or no image
• Water intrusion damage (despite the IPX7 rating on the original unit)

Key Features

• Complete assembly — LCD panel with integrated touch digitizer
• Essentially all-new, original condition
• Direct-fit replacement designed for the inReach Explorer+
• Restores both image display and touch functionality

Specifications

inReach Explorer+ original display specs (confirmed, for reference):

This part (replacement screen):

Installation Notes

Replacing the display on an inReach Explorer+ involves opening the unit's housing and disconnecting the internal display/touch flex connector from the mainboard. The original unit carries an IPX7 water rating, so careful reassembly is needed to avoid compromising water resistance. Professional installation is recommended if you're not comfortable working with small internal connectors. We do not provide detailed disassembly steps here, as incorrect handling can permanently damage the unit.

What's Included

• 1x Garmin inReach Explorer+ replacement LCD screen with touch digitizer)

Buying Checklist

• Confirm your device is specifically the inReach Explorer+ — not the original, non-Plus inReach Explorer.
• Note this is an essentially all-new, original part.
• Confirm whether professional installation is recommended for your comfort level.

FAQ

Q: Is this compatible with the original inReach Explorer (without the +)?
A: Not confirmed — this part is intended for the inReach Explorer+ specifically.

Q: What condition is this part in?
A: It's in essentially all-new, original condition.

Q: Is this compatible with the inReach Mini or Mini 2?
A: No. The Mini series uses a much smaller monochrome display and is not compatible with this part.

Package Include

• Repair parts are shown in the picture.

Product Inspection

• Display Screen Check
• Cable Connection Check
• Frame Waterproof Test
• Contact Oxidation Inspection