Product Overview

This is a complete replacement LCD display for the Garmin echoMAP CHIRP 92sv, 93sv, 94sv, and 95sv marine chartplotters, as originally assembled by Garmin. This is an OEM-pull part, removed from a donor unit, graded A (95–100% cosmetic condition) and tested to confirm 100% functionality before sale.

Important: The echoMAP CHIRP 9x series uses keypad control, not a touchscreen. This part is an LCD display panel only — it does not include a touch digitizer. If your unit has a touchscreen, it is a different model (see Compatibility section below) and this part will not fit.

Entity summary:

• Brand: Garmin
• Product family: echoMAP CHIRP series (original generation, keypad-controlled, 9" line)
• Exact models: echoMAP CHIRP 92sv, 93sv, 94sv, 95sv
• Part type: LCD display panel (non-touch)
• Condition: OEM-pull, Grade A (95–100%), tested 100% functional
• Device type: Marine multifunction display (MFD) / chartplotter/sonar combo

Compatibility

Confirmed compatible:

• Garmin echoMAP CHIRP 92sv
• Garmin echoMAP CHIRP 93sv
• Garmin echoMAP CHIRP 94sv
• Garmin echoMAP CHIRP 95sv

Not confirmed — do not assume compatibility:

• Garmin ECHOMAP Plus 92sv/93sv/94sv/95sv — same model numbers, but this is a touchscreen series with a different display and digitizer. Not the same part.
• Garmin ECHOMAP UHD 92sv/93sv/94sv/95sv — a newer touchscreen generation, also reusing these model numbers. Not the same part.
• Any other echoMAP or ECHOMAP model outside the original CHIRP series.

Because Garmin has reused the "92sv/93sv/94sv/95sv" numbering across three separate product generations (CHIRP, Plus, UHD) with different screen technology, confirming whether your unit has a touchscreen or keypad-only control is the single most important check before ordering.

Common Replacement Scenarios

This part is typically ordered to replace an original display showing:

• Cracked or shattered outer glass
• Damaged or discolored LCD panel
• Dead pixels or blank sections of the screen
• Display flickering or no image
• Water intrusion damage affecting the screen (common on marine-mounted units)

Key Features

• Genuine Garmin OEM LCD display panel, not an aftermarket reproduction
• Fits four compatible models: echoMAP CHIRP 92sv, 93sv, 94sv, 95sv
• Graded A: 95–100% cosmetic condition
• Tested 100% functional before listing
• Restores display image on keypad-controlled units

Specifications

Original unit display reference (confirmed for compatible models):

This part (replacement panel):

Installation Notes

The echoMAP CHIRP 92sv–95sv use a marine-rated, weather-sealed housing. Installing this display involves opening the sealed enclosure and reconnecting internal flex cable(s) to the mainboard. This part does not include the gasket/seal or mounting screws — reuse your original hardware, or source new ones separately, and inspect the seal before reassembly to maintain water resistance. Professional installation is strongly recommended, since improper reassembly of the sealed housing can lead to water intrusion or internal damage. We do not provide detailed disassembly steps here, as incorrect handling of the sealed housing or flex connectors can cause permanent damage.

What's Included

• 1x Garmin echoMAP CHIRP OEM-pull LCD display panel, fitting 92sv / 93sv / 94sv / 95sv

Not included: gasket/seal, mounting screws

Buying Checklist

• Confirm your unit is the keypad-controlled echoMAP CHIRP series, not the touchscreen ECHOMAP Plus or UHD series that reuse the same 92sv–95sv model numbers.
• Confirm the exact model printed on your unit's housing.
• Plan to reuse your original gasket/seal and mounting screws, or source replacements — this part does not include them.
• Since this is an OEM-pull part, note it's graded A (95–100% cosmetic) and pre-tested 100% functional.
• Confirm whether professional installation is required or recommended given the sealed marine housing.

FAQ

Q: Does this fit all four listed models (92sv, 93sv, 94sv, 95sv)?
A: Yes — all four echoMAP CHIRP models share this LCD display.

Q: Is this a touchscreen?
A: No. The echoMAP CHIRP series is keypad-controlled. If your unit has a touchscreen, you likely have an ECHOMAP Plus or UHD model instead, which uses a different display.

Q: How do I know which series my unit is?
A: Check whether your unit's screen responds to touch. If it's keypad-only, it's the CHIRP series and this part fits. If it has a touchscreen, this is not the correct part.

Q: What condition is this part in?
A: It's an OEM-pull part graded A (95–100% cosmetic condition) and tested 100% functional before listing.

Q: Does it include the seal/gasket or mounting screws?
A: No. This assembly ships without the gasket/seal or mounting screws — reuse your original hardware or source these separately.

Package Include

• Repair parts are shown in the picture.

Product Inspection

• Display Screen Check
• Cable Connection Check
• Frame Waterproof Test
• Contact Oxidation Inspection