
Product Description
Product Overview
This is a replacement LCD display screen (non-touch) for the Garmin STRIKER Vivid 7sv and Garmin STRIKER Vivid 7cv fishfinder units. It is intended to replace an original display that is cracked, has dead pixels, shows abnormal colors, or has stopped producing an image. This is a physical-button (keyed) operated display — it does not include a touchscreen panel.
Available in two versions:
- Screen only — LCD panel without frame/bezel
- Screen with frame — LCD panel with the surrounding frame/bezel included
Brand: Garmin
Product family: STRIKER Vivid
Compatible models: STRIKER Vivid 7sv, STRIKER Vivid 7cv
Device type: Fishfinder/sonar combo with GPS
Part type: LCD display screen (non-touch), available with or without frame
Compatibility
Compatible:
- Garmin STRIKER Vivid 7sv
- Garmin STRIKER Vivid 7cv
Compatibility between these two models has been verified by the seller through direct comparison of the display's flex cable/connector, confirming both models use the same cable configuration.
Not confirmed:
- Other STRIKER Vivid sizes (4cv, 5cv, 9sv) — different screen sizes, not assumed compatible.
- STRIKER Plus 7cv / 7sv (non-Vivid series) — different product generation; interchangeability not confirmed unless verified.
Not compatible:
- Any non-STRIKER Garmin device.
Common Replacement Scenarios
- Cracked or shattered display glass
- Dead pixels or discolored sections of the screen
- Display shows no image despite the unit powering on
- Faded, dim, or flickering screen
- Physical impact damage from outdoor/marine use
Key Features
- Direct-fit LCD display screen for Garmin STRIKER Vivid 7sv and STRIKER Vivid 7cv
- Cross-compatible between both models — verified by matching flex cable/connector configuration
- Available as screen-only or screen-with-frame, depending on repair needs
- 7" diagonal WVGA display, 800 x 480 resolution
- Non-touch, physical button operation
Specifications
| Spec | Value |
|---|---|
| Brand | Garmin |
| Compatible Models | STRIKER Vivid 7sv, STRIKER Vivid 7cv |
| Screen Size | 7.0" diagonal |
| Resolution | 800 x 480 (WVGA) |
| Touch Function | No — physical button operation |
| Frame/Bezel | Optional — available with or without |
Installation Notes
Replacing this component typically involves opening the unit housing and disconnecting/reconnecting the display's flex cable. If ordering the screen-only version, the original frame/bezel will need to be transferred from your damaged unit. Since the original unit is rated IPX7 for water resistance, care should be taken to properly reseal the housing after installation. Professional installation is recommended if you are not experienced with small electronics disassembly.
Buying Checklist
- Confirm your unit is either the STRIKER Vivid 7sv or STRIKER Vivid 7cv.
- Decide whether you need the screen-only or screen-with-frame version, based on the condition of your original frame/bezel.
- Compare the flex cable connector of your original damaged screen before ordering, if possible.
- Confirm with the seller whether waterproof sealing needs to be reapplied during installation.
FAQ
Q: Does this screen have touch function?
A: No, this is a non-touch LCD display screen. The STRIKER Vivid 7sv and 7cv are operated by physical buttons.
Q: Is this compatible with both STRIKER Vivid 7sv and 7cv?
A: Yes. The seller has verified compatibility by comparing the flex cable/connector on both models, confirming they match.
Q: Should I choose the screen-only or screen-with-frame version?
A: If your original frame/bezel is undamaged and can be reused, the screen-only version is sufficient. If the frame is cracked, warped, or damaged, choose the screen-with-frame version.
Q: Is this compatible with the STRIKER Plus 7cv/7sv (non-Vivid)?
A: Not confirmed. The Plus series is a different product generation, so compatibility should not be assumed without verification.
Q: Does installation require professional repair skills?
A: Professional installation is recommended due to flex cable handling and the need to maintain the unit's water resistance.
Q: What should I check before ordering?
A: Confirm your unit is either the STRIKER Vivid 7sv or STRIKER Vivid 7cv, and choose the correct version (with or without frame).
Package Include
- Repair parts are shown in the picture.
Product Inspection
- Display Screen Check
- Cable Connection Check
- Frame Waterproof Test
- Contact Oxidation Inspection
Ensure it arrives safely
We will first wrap your spare parts in bubble wrap, then put them in a cardboard box, and finally secure them with tape.
You May Curious About
Our replacement parts for Garmin are original / OEM (original or original pull-off).
Huayuxt will specify in the title which Garmin product model this repair part is suitable for. If you still have questions, you can contact our online customer service directly, and our professional customer service team will answer your questions.
We offer unlimited free remote video guidance to customers who purchase repair parts from our website, and paid guidance to other customers. However, our website has a wealth of free repair blogs and videos to help you solve most repair problems.
Although we invest significant effort into our products, we understand that you may sometimes regret your purchase or accidentally buy items you no longer need. Huayuxt offers a convenient return policy and is committed to finding solutions that are beneficial for both parties. Please review the return policy.
We typically offer a three-month warranty on our products. During this period, if any quality issues arise, we will replace the repair parts free of charge.
If you need to purchase a large quantity of items at one time, please contact me first. I will offer you highly competitive wholesale prices.
We will ship your order within 36 hours of you placing it and provide you with a tracking number and website for inquiry.